manualshive.com logo in svg

Cray Urika-GX, Руководство администратора

Поделиться
Скачать
Cray Urika-GX Скачать руководство пользователя страница 104

# 

urika-check-platform --testnodes

●

Display all of the aforementioned sections together by executing the command without any options:

# 

urika-check-platform

For more information, see the 

urika-check-platform

 man page.

4.15 iSCB Description

The Urika

®

-GX SR10216 subrack includes an Intelligent Subrack Control Board (iSCB) for remote system

management. The iSCB module reports the functional status and provides power control over the system. An
administrator can use the iSCB from a remote client to monitor the state of subrack components, such as: nodes,
power supplies, and fan modules. The Hardware Supervisory System (HSS) provides a command-line interface
using the 

xtcli

 command for the configuration and management of the SR10216 subrack system. Use only the

HSS 

xtcli

 command to monitor and control the system.

CAUTION: Do not use the CLI commands other than the status command for the ISCB module (unless
advised by Cray Support), as they may interfere with performance of the system management software.
For more information, contact Cray support.

Each Urika-GX iSCB module has a single Gigabit Ethernet port and a dedicated logical serial port assigned for
command and power management access. The iSCB module is typically managed over a secure private
management network. Cray recommends the iSCB not be connected to a publicly accessible network.

Once logged into the HSS using the 

xtcli

 command, administrators can:

●

Quickly access system and component information

●

Quickly view hardware inventory, system event logs, and system configuration reports

●

Dynamically control fan speeds or set static speeds

●

Monitor sensors to dynamically change fan speeds and maintain optimal operating temperatures

●

Power blades on and off

●

Easily view current status for all hardware components (blades, cooling modules, and power modules)

●

Configure alert notification destinations and policies

Refer to the Urika

®

-GX System Administration Guide S-3016 for more information about using the 

xtcli

command and other management utilities.

4.15.1 Log on to the iSCB

Access to the iSCB module is made through an SSH password-less login. Once logged on, iSCB CLI commands
can be run to monitor and control components of the subrack.

[r0s0i0 root]# 

ssh r0s0i0

Last login: Wed Jun 29 20:55:06 2016 from r0s0i0

[r0s0i0 root]# 

iscb ver

iSCB Ver 1.1 (11:53:51 02/18/16 PST) active (0h)

ok

[r0s0i0 root]#

System Monitoring

S3016 

 

 104

Содержание Urika-GX

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды