Cray CS400-AC Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 49

Cray CS400-AC Скачать руководство пользователя страница 5

packaging (antistatic bags and ESD foam) so there is at least 2 inches of threedimensional clearance between
the part and the shipping box. Cray will not be responsible for any damage as a result of poor customer
packaging and may return the damaged part as is, without repair or replacement. Customers may consolidate
multiple RMA requests in a single CrayPort case. Similarly, customers may consolidate multiple RMAs in a single
box, provided it meets Cray packaging recommendations.

Customers must print the CrayPort case number visibly and legibly on the exterior of the box or on the shipping
address label.

CS400-AC Part Numbers

Part Number

Description

GreenBlade\Subrack

101129600

SR5110 subrack, 5U 10X node. Includes L/R angle brackets and cable management bar

000-01601A

SR8204 subrack, 8U 4X node. Includes L/R angle brackets and cable management bar

101129800

SR8116 subrack, 8U 16X node. Includes L/R angle brackets and cable management bar

101117701

Chassis, GB522XA, PCIe3 X16 Slot 1, KP

101210400

Chassis, GB522N expansion blade, up to 2X K20/X/K40

101210500

Chassis, GB522N expansion blade, up to 2X K80

101195200

Chassis, GB822XA, 6X 2.5" HDD bay

002-00372B

Fan module assembly, air cooled systems, (for SR5110/SR8204/SR8116 subracks)

23101-0295-01

Fan module replacement dual fans: 12V, 3000 rpm with cable assembly

22302-0270-01

Fan module: fan interface board (FIB) for 2 fans

002-00374C

iSCB module (SR5110/SR8204/SR8116 subracks)

22302-0313-01

iSCB module PCBA - Ext Board, GB2 IO, 10/100, RJ45, reset/LED

22309-0005-04

iSCB module PCBA - CPU, GB2 IMX253, 16 node mgr, hot-swap (plugs to midplane)

002-00316A

Cable management bar assembly, GB2 (SR5110/SR8204/SR8116 subracks)

150-00143B

Power supply, GreenBlade 1630W, 1U, 277V input, 133A/12V 6A/5Vsb (SR5110/SR8204/

SR8116)

101139200

Riser card, 1U PCIe-3 x16, S2600KP/TP Slot 1

101243300

Subrack support angle assembly, left side, 25.945 +-0.75" (SR5110/SR8204/SR8116)

101243400

Subrack support angle assembly, right side, 25.945 +-0.75" (SR5110/SR8204/SR8116)

GPUs and Coprocessors

101219400

Cable Assembly, Twin-Ax, Slot 2, PCIEX16 GB522N/M

51010-3218-00

PCIe Cable Bracket, GB522MN (Used with twin-ax cable assy)

56000-0030-01

Gasket EMI, GreenBlade Expansion

22302-0412-00

GPU Node IFB, 4U MIC CoProcessor GB522M, 2 GPU Hot-Swap, KP

CCS Parts Repair and Replacement

HR90-2009

5

CS400-AC Hardware Replacement Procedures

«
...
3
4
5
6
7
...
»

Содержание CS400-AC


















































Отзывы:

Нет отзывов