Date of issue:
September 2018
Revision
4
Page
33/56
SANITISATION
If the appliance has not been used for some
days after being thoroughly cleaned and
sanitised as described in Chapter 9, at restart
the following sanitising operations should be
carried out.
- Take off the lid.
- Fill the top tank with water and sanitizer for
objects for food use (use KAY-5
®
Sanitizer/Cleaner with a 100ppm dilution (1 Oz
packet of KAY-5
®
+2 ½ gallons of water) (the
sanitizing product shall comply with 40 CFR
§180.940), carefully following the doses
prescribed by the manufacturer of the same.
- Start the appliance in wash mode and leave
for the time specified by the manufacturer.
IMPORTANT
Do not leave the sanitizer in the tank for
periods in excess of those prescribed by
the manufacturer
- Empty the tank by opening and closing the tap
at least 10 times in order to sanitise the mix
flow zone too.
- Rinse thoroughly by repeating the same steps
but using only clean water in place of the
sanitizer.
- After carefully performing these operations the
appliance is ready for use.
10.
EXTRAORDINARY MAINTENANCE
Attention
Before carrying out any maintenance, you
must switch off the appliance and unplug
the power lead from the socket.
Cleaning the condenser
In order to ensure good performance of the
cooling system, it is essential to clean the
condenser at least
once a month, or
whenever the level of clogging
necessitates it
.
To gain access:
- Switch off the power to the appliance by
turning off the main switch and disconnect the
power lead.
- Clean the condenser positioned under the
machine with a vacuum until all the dust has
been removed.
IMPORTANT
Never use a screwdriver or any other sharp
object to remove dirt accumulated between
the fins of the condenser.
