background image

GTD65 Guitar Amplifier w/DSP and Channel Tracking

Introduction

Congratulations!

 You are now the proud owner of the Crate GTD65 three-channel guitar ampli-

fier with advanced digital signal processing (DSP) and Channel Tracking. This rugged ampli-
fier combines outstanding features with serious clean and distorted sounds. Digital Reverb, 
Chorus, and Delay provide you with a wide variety of sounds. Crate’s unique Channel Tracking 
feature automatically stores your DSP settings for each channel to memory. As you switch 
from one channel to another, the DSP settings for the selected channel are instantly recalled. 
The supplied three-button footswitch allows you to select channels and change the DSP bank 
(Bank A/Bank B) by “remote control.” A front panel 1/8" stereo CD input jack allows you to 
play along with your CD player, MP3 player, or iPod. A rear panel insert jack allows you to 
add even more effects by connecting an external effect processor.
Like all Crate products, your GTD amplifier is designed by musicians and built using only the 
best components. Extensive testing confirms that this amplifier is the absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge you to read this manual 
before you begin playing.

And 

thank you

 for choosing Crate.

Here are some of the features packed into your new GTD65 Combo Amplifier:
• 

65 watts rms power output

• 

1 x 12" speaker

• 

Three-Channel 

Operation 

 

     

 

 

—High 

Gain 

Channel 

 

     

 

 

—Overdrive 

Channel 

 

     

  

—Clean 

Channel

• 

3-band EQ on the Overdrive and Clean Channels

• 

Proprietary “Shape” EQ control on the High Gain Channel

• 

DSP Effects including Delay, Chorus, and Reverb sections

• CD 

Input

• Effects 

Loop

• 3-Function 

Footswitch 

included

• External 

Speaker 

jack

• 

Built-in Chromatic Tuner

3

Содержание GTD65













Отзывы: