background image

14

 

National Rejectors, Inc. GmbH, Buxtehude 

c

2

 Configuration

s

eTTinGs

 

for

 

fillinG

 

anD

 

empTyinG

 

casseTTe

Settings for filling and emptying cassette

  This chapter describes useful or required settings for refilling and emptying 

the coin cassette:

Configuring float level

• 

Setting tube counters to float-level automatically

• 

Correcting tube counters according to filling level sensors

• 

Resetting tube counters before refilling cassette

• 

Redirecting cash-box coins to return area

• 

Reporting inserted coins to machine (only c

• 

2

 MDB)

Disabling/enabling inventory keys / disabling/enabling inventory keys 

• 

using MDB/BDV protocol

Which settings should be done?

To enable the coin changer to register the exact coin number we recommend 

the following settings depending on the filling method used:

Settings for tube refilling by coin insertion

If the cassette is refilled by inserting the tube coins (and without emptying 

the cassette completely beforehand), see that the tube counters are 

not 

corrected according to the filling level sensors automatically, as the inserted 

coins will be registered exactly in the tube filling mode.
Whereas, if you remove and completely empty the cassette before inserting 

the  tube  coins,  you  should  set  the  following  in  order  to  reset  the  tube 

counters before refilling the cassette:

Resetting the tube counters before refilling the cassette

• 

Correcting tube counters according to filling level sensors automatically

• 

Settings for direct refilling the removed cassette

If the cassette is removed to be directly refilled with a certain number of coins 

per tube, i.e. counted coins, the coin changer must be set as follows to ensure 

the exact registration of the coin number:

Configuration of the coin number as float level per tube

• 

Automatic tube counter setting to float levels

• 

De

• 

activation of the automatic tube counter correction according to filling 

level sensors

If the cassette is removed to be directly refilled with any number of coins, the tube 

counters must be corrected according to filling level sensors automatically.

Содержание NRI Currenza C2




















































































Отзывы: