5
OPERATION & USE
REMOVE plastic covering from the filter before the first use.
The air purifier and bladeless fan may be operated by the control panel (as shown in figure 2)
or by your remote control.
Place the fan in the desired location on a flat and stable surface. Plug in the Air Purifier and
Bladeless fan.
Note:
The air purifier and bladeless fan is now in standby mode.
Power (ON/OFF)
To turn the unit power on,
press the
key
to turn on the power. The fan starts at the F5
speed level. Touching the key again will stop the unit.
Fan Speed
While the unit is on,
press the
key
to adjust the fan speed to desired level (F1 to F9 level).
The speed setting is displayed on the LED display.
Press the
or
on the remote control to raise and lower the fan speed.
Oscillation (LEFT/RIGHT)
While the unit is on,
press the
key
to allow the fan to oscillate left and right. To stop the
oscillation, press the key again.
Press the
on the remote to turn the oscillation on and off.
Timer
While the unit is on,
press the
key
to set the timer. You can set the time between 15 minutes
and 12 hours. Each touch of the key will increase the timer.
Note
: the first press of the
will start the timer at 15 minutes. Each press of the (timer icon) will raise
the time: 15 minutes, 30 minutes, 45 minutes, 1 hour-12 hours.
Press the
button
on the remote control and the LED display will show 6h and the air purifier
and bladeless fan will shut off after 6 hours. Press the
again to increase the time by 1 hour
up to 12 hours. Press the
after 12 hours and the timer function is cancelled.
Press the (icon) button
on the remote control and the LED display will show 5h and the air
purifier and bladeless fan will shut off after 5 hours. Each press of the again to decrease
the time down to 15 minutes. Press the again after 15 and the timer function is cancelled.
Press the
key on the control panel
or
the
/
button on the remote control to cancel the set
timer function.
Содержание EE-5621
Страница 10: ...8 ...
