Crane EE-5303A, Инструкция по эксплуатации, Страница: 8 / 14

6
ASSEMBLY & USE
SET BASE IN DESIRED LOCATION BEFORE FILLING THE TANK.
Moving humidifier while tank is placed on the base may cause leakage or overfilling of the base.
1.
Turn Water Tank upside down, unscrew Water Tank Cap and fill with cool water only.
ALWAYS HOLD WATER TANK WITH TWO HANDS WHEN FULL.
DO NOT fill water all the way to the rim.
DO NOT use hot water.
DO NOT add any medication, essential oils, or salt.
DO NOT pour water into Mist Lid.
2.
Screw Water Tank Cap back onto Water Tank and turn the tank over to place on
Humidifier Base, making sure it fits together securely.
3.
Plug the power cord into a wall socket and turn on the unit by using the Power
Button. The LCD Display will then illuminate.
4.
Use the menu button to scroll through the settings options and the arrow buttons to
adjust your selections.
SET THE CORRECT HUMIDITY OUTPUT: Adjust the Mist Output so the mist rises up to be
absorbed by the room air. If mist drops quickly, turn down the control knob until the mist
is rising up.
5.
When the humidifier runs out of water, the Empty Indicator Light will blink and the
mist output will stop. This is a safety feature to prevent the humidifier from possibly
overheating and damaging the Nebulizer. Turn the humidifier off and unplug the
unit before removing and refilling the water tank. When emptying the base, be sure
to pour away from the fan outlet.
A NOTE ABOUT HUMIDITY

To reduce excessive humidity or condensation, especially in small rooms, leave the room
door open and adjust mist intensity to the low output setting.

Too much humidity in the room may allow moisture to accumulate on surfaces where
bacteria and fungi can grow. Moisture that gathers may also damage furniture and
walls, especially wallpaper.