Crane BARNES PRESSURE SYSTEMS ULTRA GRIND Simplex 130961, Руководство по установке

Страница: 13 / 19

13
Power/Control Cable- Insert female end of cable
plug into housing bore aligning alignment mark with
hole in terminal block see Figures 4 & 5. Tighten bolts
on compression flange until flush with motor housing.
Pump Power - Large Pin
Level Control - Small Pin
Level control cord has molded fitting at both ends of
the cord. Install one end to the Pump and the other
end to the Level Control.
FIGURE 9
FIGURE 10 - Automatic Pumps
STEP 7.
Pump & Level Control Wiring