manualshive.com logo in svg

Crane BARNES 4SE Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Crane BARNES 4SE Series Скачать руководство пользователя страница 11

Set motor housing (3) next to motor (5) and lower end bell
(22) assembly. Make wire connections per paragraph
F-3.3. Set square ring (24) in groove on lower end bell (22)
and lower motor housing (3) down onto lower end bell (22)
while aligning holes. Place socket head cap screws (23)
through lower end bell (22) into motor housing (3) and
torque to 60 inch pounds. Assemble impeller and volute
per paragraph F-2.2. 

F-3.3) Cable Assembly:
Power Cable- 

Make wire connections as outlined in

paragraph F-3.4. Refill with cooling oil (if it has been
drained) as outlined in paragraph F-1.3. Insert one friction
ring (28c), grommet (28d), another friction ring (28c) into
motor housing (3). Apply pipe sealant to gland nut (28b)
and screw into motor housing (3). Torque gland nut (28b)
to 15 ft. lbs. to prevent water leakage (see Figure 6).

Control Cable (optional)- 

Insert one friction ring (39c),

grommet (39d) and another friction ring (39c) into motor
housing (3). Apply pipe sealant to gland nut (39b) and
screw into motor housing (3). Torque gland nut (39b) to 15
ft. lbs. to prevent water leakage (see Figure 6).

F-3.4) Wiring Connections:

Check power cable (28) and control cable (39) (if used),
for cracks or damage and replace if required (see Figure
6). Place parts (28b, c & d) on power cable (28a), and parts
(39b, c & d) on control cable
(39a if equipped). Bring cord sets (28) and (39 if equipped)
through openings in top of motor housing (3) and
reconnect motor leads to power cable (28) and
temperature sensor leads to control cable (39 if equipped)
using connectors (4), and in addition use (34) and (35) for
three phase units and temperature sensor leads, as
shown in Figure 7. Attach ground wire to motor with screw
(27).

Fig. 6

POWER CABLE (28a)

GLAND NUT (28b)

FRICTION RING (28c)

GROMMET (28d)

FRICTION RING (28c)

CONTROL CABLE (39a)

GLAND NUT (39b)

FRICTION RING (39c)

GROMMET (39d)

FRICTION RING (39c)

11

Manual Index

Содержание BARNES 4SE Series

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды