7
E-4) Pedestal and Shaft Service:
To examine or replace shaft (1) or pedestal (2), disassemble
as outlined in Paragraph E-2 and E-3. Remove slinger (3), cap
screws (5), lockwashers (6) and pull bearing cap (28) together
with shims (27). Remove shaft with assembled bearings.
Examine all parts and replace those showing wear or damage.
SECTION: F REPLACEMENT PARTS
F-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the
following information:
1. Pump serial number and date code. (F-4)
2. Pump model number. (F-3)
3. Pump part number. (F-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing instructions.
F-2 PART NUMBER:
The part number consists of a six (6) digit number, which ap-
pears in the catalog. A one or two letter suffix may follow this
number to designate the design configuration. This number is
used for ordering and obtaining information.
F-3 MODEL NUMBER:
This designation consists of numbers and letters which rep-
resent the discharge size, series horsepower, motor phase
and voltage, speed and pump design. This number is used for
ordering and obtaining information.
F-4 SERIAL NUMBER:
The serial number block will consist of a six digit number,
which is specific to each pump and may be preceded by
a alpha character, which indicates the plant location. This
number will also be suffixed with a four digit number, which
indicates the date the unit was built (Date Code). EXAMPLE:
A012345 0490.
Reference the six digit portion (Serial Number) of this number
when referring to the product.
