36
Handling
AUS
measurement will then appear on the display
6
for one second. If no measurement has been per-
formed yet, the device will not show any values.
2. The cuff will now inflate
2
and you will feel it tight-
en (see
fig. A).
If no measurements have been saved, the blood
pressure monitor will inflate the cuff up to a pressure
of 190 mmHg. Otherwise, the device will calculate
the average systolic pressure of all previous meas-
urements, add 40 mmHg and inflate the cuff to that
value.
3. As soon as the blood pressure monitor detects your
pulse, the pulse indicator will blink on the display
22
. If this is not the case, the device will inflate
again (see
fig. B).
4. Once the measurement is complete, the entire air
will be released from the cuff. The measurements
for systolic pressure
14
, diastolic pressure
15
and
pulse
18
will appear on the display and be saved.
The WHO-LED corresponding to the measured values
will light up (see
fig. B).
5. If you do not want to perform automatic data trans-
mission, use the user 1 touch button
10
or the user 2
touch button
8
to switch the blood pressure moni-
tor to sleep mode (see
fig. B).
If you have prepared the blood pressure monitor and
your smartphone or tablet accordingly, automatic
data transfer to the app will begin following the
measurement:
