AFTER SALES SUPPORT
1800 465 070
14
MODEL: S002391 PRODUCT CODE: 14498 06/2020
Assembly Instructions (cont)
Step 3
(100) Screw cap - 1pc
(31) OD32*ID13*2.0T
6MM allen wrench
Multi-functional spanner
NOTE:
The M12 nut (32) is pre-assembled on the Adjust knob (18). These parts are placed in a seperate
PE bag. Please make sure to identify them out of box before this step.
Remove all of the following parts pre-assembled. Pull pin (27), Nylon nut (28), Screw 1/2*100 (29), 2 x
washers (30).
Attach the Sliding rail (17) to the Main frame (1). Connect the Sensor wire(92) with console wire (98).
Align all the holes from both parts.
Insert the removed Screw 1/2*100 (29), 2 x washers (30), Nylon nut (28) the aligned holes as shown and
lock them tight. Put the Screw cap (100) on as shown.
Insert the Pull pin (27) through the aligned holes. Insert Ajust knob (18), M12 nut (32) and washer (31)
through the holes aligned and lock them tight.