Cramer 1600086, Руководство пользователя

Страница: 11 / 187

11
cramer.eu
GB EN
SCREEN DESCRIPTION
When the LCD display flashes the
“OVERCONSUMPTION” message on the
top line, it indicates the following:
1. The pruning shears have performed more
than 50,000 cutting cycles.
2. The average current of the last 1,000
cutting cycles is very high in relation to the
total average of the cutting cycles.
For more information, see
Troubleshooting
.
Table 2. Acoustic signals
SIGNAL OPERATION ACTION TOOL STATUS
One
beep Opening
operation Trigger pressed
and function
button. 2 seconds. Blade opening
Two
beeps Cutting cycle Trigger pressed
for 2 seconds
with blade closed. Blade opening
change
Three
beeps Close
Stop Trigger pressed
and function
button. 2 seconds
with blade closed. Pruning shears
turn off
Five
beeps Maintenance
warning During operation. Battery
capacity at
20%.
Prepare to
charge.
Ten
beeps Maintenance
warning During operation. See
Maintenance
Cycle Control
.