CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL [email protected] WEBSITE: http://www.cramaro.com -
Manual n° MCA016-EN-ED00 – date 15/01/15
page
55
Its assembly is identical to that for the
SIMPLE TAIL
, which we have just seen
.
Therefore, once the sheet has been extended properly and the entire tarpaulin has been assembled, simply
apply the THREE pieces of
Ø 6mm
rope to the eyelets already present on the lower edge of the tail itself,
creating a "
Y
" that is long enough to enable the operator to easily hook the rope onto the rear door of the
container.
The last thing to apply is the
CLEAT BRACKET
, which must be positioned on the lower part of the door in a
convenient position that, at the same time, is not subject to impacts when unloading the vehicle.
This bracket allows the traction
ROPE
of the tail with spring to be securely anchored
The SELF-ROLLING TAIL can also be assembled as an accessory, in replacement of the STANDARD TAIL fitted on
the tarpaulin at the time of initial assembly.
Assembling AFTER MARKET or REPLACING a damaged TAIL WITH SPRING:
1.
MAKE SURE
that the area in which you intend to carry out the operation is free from persons who could be
injured by falling elements or work tools used to transform and/or repair the tarpaulin.
2.
WEAR PROTECTIVE GLOVES,
as all work of this kind could be a source of even serious injuries.
3.
PREPARE A SURFACE TO WORK ON AROUND THE REAR
and FRONT PARTS OF THE VEHICLE,
which ensures a sufficient level of safety for the operator carrying out the work. (
RESPECT THE
WORKPLACE SAFETY STANDARDS IN FORCE
)
4.
Remaining on the ground,
FULLY RETRACT THE TARPAULIN THAT NEEDS MODIFYING,
activating the
movement fitted on the vehicle.
5.
LOOSEN THE PULLING ROPE TENSIONERS,
therefore, loosen the rope locking clamps in the rear part of
the tarpaulin.
6.
SLIDE THE ROPES OUT FROM THE LAST TARPAULIN BOW
(ONLY FROM THE LAST ONE) and remove it from the sheet POCKET
containing it, being careful not to
make the entire tarpaulin fall off the vehicle
(this could be dangerous for the safety
of the operator.
if necessary, tie it to the container with
a bit of cord)