MICRO SD CARD INSTALLATION:
The unit is support to take photos/videos then store in a Micro SD Card (not included).
Insert a Micro SD Card into the Micro SD Card Slot with contact fingers face to bottom side as the
illustrated below:
Notes:
A.
Insert the class 4 (or up) Micro SD Card (Up to 32GB) into the Micro SD Card Slot with
contact fingers face to bottom side. When inserting the storage card, make sure the direction
you selected is correct. Never insert violently to avoid damaging the card or the unit. If it
doesn’t work, please check if the direction is correct.
B.
To take out the card, press the card until a “Click” sound is heard then pull out the card.
C.
Before insert or replace the storage card, make sure the unit is in powered off mode (The
battery had not connection).
D.
When the card is first time use, or it has been used in other device. Format it through the
computer
before install to the unit..
(Important: After format, all record in the memory card will be erased. Upload the record to the
computer before format.)
OPERATION
1.
Insert the Micro SD Card into the unit as previously instructed.
2.
Recharge the supplied rechargeable battery and install it into the unit as previously instructed.
The decorative LED lights on the unit will illuminate and blink.
3.
Place the unit on a horizontal place.
4.
Install the batteries to the Remote Control as the previous procedures. Press the
Power
On/Off Button to turn on the Remote Control. The Power On Indicator will illuminate and blink.
7
