TROUBLE SHOOTING:
SYMPTOM:
POSSIBLE CAUSE
POSSIBLE SOLUTION
The batteries are drained.
Replace by new batteries.
Remote Control not
functioning
Batteries wrong installed.
Reinstall the batteries as the polarity marking
inside the battery compartment.
The battery had
not connected to the unit
Connect the battery to the unit as
the “PREPARATIONS” section on page 5.
The battery drained.
Recharge the built-in battery as the
“PREPARATION” section on page 4.
The unit not workable
The unit had not paired to the
Remote Control.
Pair the unit to the Remote Control
as “OPERATION” section on page 7 - 8
point 2 - 5.
The blade still running after
landing
The unit had not completely
landing and stop running.
Landing and wait the blades stop running as
page 8 point D
Control abnormal
or motion unstable
One (or more than one)
blade(s) deformed or
damaged.
Check and replace the deformed/damaged
blade(s) by new one.
The unit can not
moving straightly
or auto turning
Reset the built-in Gygo as page 9
Or, fine turn the trimmers as page 8 point N - O
Micro SD Card had
not installed
Install a Micro SD Card (not included) as page 7
Camera not functioning
Camera had not connected to
the unit
Connected the connection cable from camera to
the unit as the illustrated below:
10
