USB Ports (Full size USB port)
This device supports USB device for extending the memory size, or USB Thumb Drive. If you have one
of these devices, insert it into the USB Port on the sides of unit.
Notes:
A. Before replacing the USB drive, make sure the unit has been powered off.
B. When inserting the USB driver, make sure the direction you select is correct. Never insert violently
to avoid damaging the USB driver or the unit. If it doesn’t work, please check if the direction is
correct.
Power on/off the Device
A.
Press and hold the Power
On/Off button on the front panel to power on the unit
B.
To save power of battery. Press the Power.
On/Off button to turn off the screen. Press it again to
turn the unit on.
C.
To power off the device, press and hold the Power
On/Off button until the "Device option" shows
on the screen. Move the cursor to the Power off option and then click the left button. “Power off”
menu will appear, move the cursor to “OK” option then left click it.
Notes:
Like your computer, after turning on the Device, you may have to wait a short while to let
the operating system boot up before the home page appears on the screen.
Touch Pad:
Touch the pad to move cursor on the screen as desired. Press the Left or Right button to do click action.
Reset:
If the device becomes abnormal, halts, freezes. Press the RESET Button. To reset the device, please
see the figure shown below:
- -
7
