Craig CHT940DO, Руководство пользователя

Страница: 10 / 16

FM Antenna
The Antenna wire on the top of the unit is for radio reception. If reception is weak, unwind
and extend the wire or relocate the wire to improve the radio reception.
10
LISTEN TO FM RADIO
1. Connect the Sound Bar to the power as previous procedures.
2. Press the POWER/SOURCE Button on unit or press the
Button on remote control
to power on the unit.
3. Press the POWER/SOURCE Button on unit or press the SOURCE Button on remote
control repeatedly until the FM frequency appears on the display.
4. Press and hold the TUN - / or TUN + / Button on the unit or remote control until
the FM frequency on the display start running then release the button to search a nd
7. If the available FM station is stereo, the unit will plays it in stereo mode automatically.
If the reception is no good, press the MO/ST Button on remote control to switch to
Mono mode. Press again to turn back to Stereo mode.
plays the available FM stations forward or backward. Or,
5. Press and hold the PRESET Button on the remote control until the FM frequency on the
display start running then release the button. The unit will search and store all the
available FM stations automatically, then plays the first searched and stored FM station.
(Up to 30 stations can be stored). Press the M+ Button on the remote control repeatedly to
select and plays the desired stored channel.
6. Press and release the TUN - / or TUN + / Buttons on unit or remote control
repeatedly to fine tune.