6
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Recessed
Plug
Trigger Switch
Cord
Retainer
Air Vents
Debris Shield
Line Limiter Blade
Motor Housing
Trimmer Head
with 0.065 inch
Trimmer Line
Assist Handle
Tap Button
RECESSED PLUG
The
RECESSED PLUG
is where you at-
tach your extension cord to the unit.
TRIGGER SWITCH
The
TRIGGER SWITCH
is used to turn
on the unit. Squeeze the trigger switch
to operate the unit. Release to stop.
LINE LIMITER BLADE
The
LINE LIMITER BLADE
cuts the cut-
ting line to the proper cutting length.
ASSIST HANDLE
The
ASSIST HANDLE
is used to help
hold and guide the unit.
TRIMMER HEAD
The
TRIMMER HEAD
holds cutting line
and rotates during operation.
TAP BUTTON
The
TAP BUTTON
is used to advance
the cutting line during operation and to
remove the spool during line replace-
ment.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord
Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100 Ft. (30 m)
18 Gauge
16 Gauge
16 Gauge
Extension cords are available for this
unit at Sears.
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook as
shown. Insure the plug and cord are
firmly and fully engaged.
Cord Retainer
Extension Cord
