10
6. Snap the Power Cord into the Cord Retainers in the
front surface of the Rack and loop around the Cord
Keeper behind the Wand Storage Area.
The Cord may exit on either the left or right side.
Plug the Power Cord into the electrical outlet. Do not
fasten Power Cord to wall in any way.
Fig. P
Cord
Keeper
Cord
Electrical
Outlet
Removing Vac from Storage Rack (Fig. R)
Fig. Q
Insert Hose (Fig. Q)
Insert the Hose Locking End of the Hose into the Vac Inlet
Port. The Hose should snap into place.
To Remove the Hose from the Vac, press the Release
Button in the Hose Assembly and pull the Hose out of the
Vac Inlet Port, as shown.
Fig. R
Carry Handle
Release Tab
Storage Rack
Vac
PULL UP
AND OUT
Vac Inlet
Port
Hose Assembly
Hose Release Button
WARNING:
Unplug Vac and remove power cord from rack before
removing Vac.
!
1. With your right hand, raise the Carry Handle.
2. With your left hand, depress the Release Tab located
on the upper left corner of the Storage Rack.
3. Lift up on the Carry Handle, and pull the Vac up and
out of the Storage Rack.
SP7085-2 CMXEVBE179250.indb 10
10/24/19 12:48 PM
