3
English
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help.
NOTICE:
Per FCC Part 15, changes or modifications to this
equipment not expressly approved by CRAFTSMAN could void
your authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-
003.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Refer to Figure A at the beginning of this manual for a
complete list of components.
Intended Use
This work light is suitable for Indoor Use.
DO NOT
use under wet conditions or in presence of
flammable liquids or gases.
DO NOT
let children come into contact with the work light.
Supervision is required when inexperienced operators use
this work light.
Specifications
Model
CMXELAYMPL1033
Power
30 Watts
Brightness
3,000 Lumens
Color Temperature
4000K
Color Rendering Index
80
Input Voltage
AC 120V 60Hz
Location Rating
Damp Locations
Power Cord
5 ft
Net Weight
3.97 Lbs.
UNPACKING
WARNING:
It is unlikely the product is faulty or has
a missing component. If you find product is faulty,
do not operate the product until the parts have been
replaced or the fault has been rectified. Failure to do so
could result in serious personal injury.
Remove work light from carton and discard all packaging.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off, disconnect it from power
source and put it on a stable secure position
before making any adjustments or removing/
installing attachments or accessories.
WARNING:
Risk of unsafe operation. When
performing maintenance, you may be exposed to
voltage sources. Personal injuries can occur. Before
performing any maintenance, disconnect power
source from the work light.
The work light is fully assembled out of the box.
Unfold Work light (Fig. A, B, C, D)
Unfold the base
10
from the frame
11
to desired angle, as
shown in Fig. D.
Fig B.
11
10
Fig C.
90°
Limitation Mark
Fig D.
WARNING:
The angle between frame and base is
limited to 90 degrees, the limitation mark is shown in
Fig D. NEVER adjust the frame beyond the maximum
limitation mark position.
Adjusting Light Direction (Fig. A, E)
WARNING: To reduce the risk of serious personal
injury, turn work light off and disconnect it from
power source before making any light direction
adjustments or removing/installing attachments
or accessories.
