English
2
20V Max* Inflator
CMCE520
IMPORTANT SAFETY INSTRUCTIONS
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
DANGER: RISK OF EXPLOSION OR FIRE
What can happen
how to prevent it
It is normal for electrical contacts
within the motor and pressure
switch to spark.
Always operate the unit in a
well ventilated area free of
combustible materials, gasoline, or
solvent vapors.
If electrical sparks from unit come
into contact with flammable
vapors, they may ignite, causing
fire or explosion.
If spraying flammable materials,
locate unit at least 20 feet
(6.1 m) away from spray area.
An additional length of hose may
be required.
Store flammable materials in a
secure location away from unit.
Restricting any of the unit
ventilation openings will cause
serious overheating and could
cause a fire.
Never place objects against or on
top of unit pump.
Operate unit in an open area at
least 12" (30.5 cm) away from
any wall or obstruction that would
restrict the flow of fresh air to the
ventilation openings.
Operate unit in a clean, dry well
ventilated area. Do not operate unit
indoors or in any confined area.
Unattended operation of this
product could result in personal
injury or property damage. To
reduce the risk of fire, do not allow
the unit to operate unattended.
Always remain in attendance with
the product when it is operating.
Always turn off and unplug unit
when not in use.
CAUTION:
RISK FROM NOISE
What can happen
how to prevent it
Under some conditions and
duration of use, noise from
this product may contribute to
hearing loss.
Always wear certified safety
equipment: ANSI S12.6 (S3.19)
hearing protection.
DANGER: RISK TO BREATHING
(Asphyxiation)
What can happen
how to prevent it
The compressed air directly from
your unit is not safe for breathing.
The air stream may contain
carbon monoxide, toxic vapors, or
solid particles from the air tank.
Breathing these contaminants can
cause serious injury or death.
Air obtained directly from the unit
should never be used to supply air
for human consumption. In order
to use air produced by this unit
for breathing, suitable filters and
in-line safety equipment must be
properly installed. In-line filters
and safety equipment used in
conjunction with the unit must
be capable of treating air to all
applicable local and federal codes
prior to human consumption.
Exposure to chemicals in dust
created by power sanding,
sawing, grinding, drilling, and
other construction activities may
be harmful.
Work in an area with good
ventilation. Read and follow the
safety instructions provided on the
label or safety data sheets for the
materials you are spraying. Always
use certified safety equipment:
OSHA/MSHA/NIOSH respiratory
protection designed for use with
your specific application.
Sprayed materials such as paint,
paint solvents, paint remover,
insecticides, weed killers,
may contain harmful vapors
and poisons.
WARNING: RISK OF BURSTING
WARNING:
Some dust contains chemicals known
to the State of California to cause cancer, birth
defects or other reproductive harm such as asbestos
and lead in lead based paint.
What can happen
how to prevent it
Unauthorized modifications to the
inflator, hose or any components
which control air pressure..
The inflator is designed to provide
specific operating pressures.
Never make adjustments or parts
substitutions to alter the factory set
operation pressures.
Attachments & Accessories:
Exceeding the pressure rating of
air tools, spray guns, air operated
accessories, tires, and other
inflatables can cause them to
explode or fly apart, and could
result in serious injury.
Follow the equipment
manufacturers recommendation
and never exceed the maximum
allowable pressure rating
of attachments.
