Craftsman Bolt-On 35592, Руководство оператора

Страница: 4 / 16

4
g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power tool
for operations different from those intended could result in a hazardous situation.
5) SeRvICe
a) have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Drill Safety Warnings
•
Use auxiliary handle(s) if supplied with the tool. Loss of control can cause personal injury.
•
hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a
“live” wire may make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
•
Use clamps or another practical way to secure and support the work piece to a stable platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
•
keep your hair, clothing, and gloves away from air vents.
Air vents often cover moving parts in
which these items can be caught.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and wash exposed areas with soap and
water.
Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of
harmful chemicals.
•
Wear appropriate hearing protection during use.
Under some conditions and duration of use,
noise from this product may contribute to hearing loss.
WARNING:
Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury
. Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure. Direct particles away from face and body.
WARNING:
AlWAyS use safety glasses. everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. AlWAyS WeAR CeRTIfIeD
SAfeTy eQUIPMeNT:
•
ANSI Z87.1 eye protection (CAN/CPA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NOSH/OSHA respiratory protection.
SyMBOlS
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ....................volts A .....................amperes
Hz ..................hertz W ....................watts
min .................minutes
..................alternating current
..............direct current
no ....................no load speed
..................Class I Construction ....................earthing terminal
(grounded) ..................safety alert symbol
..................Class II Construction .../min or rpm...revolutions or
(double insulated) reciprocation per minute
..............Read instruction manual before use ....................Use proper respiratory protection
..................Use proper eye protection ....................Use proper hearing protection