manualshive.com logo in svg

Craftsman 944.366780, Руководство пользователя

Поделиться
Скачать
Craftsman 944.366780 Скачать руководство пользователя страница 13

13

SERVICE AND ADJUSTMENTS

CLEANING

IMPORTANT:  For best performance, keep 
mower housing free of built-up grass and 
trash. Clean the underside of your mower 
after each use.

 CAUTION:  Disconnect spark plug wire 

from spark plug and place wire where it 
cannot come in contact with plug.
•   Clean the underside of your lawn mower 

by scraping to remove build-up of grass 
and trash.

•   Clean engine often to keep trash from 

accumulating.  A clogged engine runs 
hotter and shortens engine life.

•   Keep fi nished surfaces and wheels free 

of all gasoline, oil, etc.

•   We do not recommend using a garden 

hose to clean lawn mower unless the 
electrical system, muffl er, air fi lter and 
carburetor are covered to keep water 
out.  Water in engine can result in short-
ened engine life.

CLEAN UNDER DRIVE COVER
Clean under drive cover at least twice a 
season. Scrape underside of cover with 
putty knife or similar tool to remove any 
build-up of trash or grass on underside of 
drive cover.

MUFFLER
Inspect and replace corroded muffl er as it 
could create a fi re hazard and/or dam age.

SPARK PLUG
Replace spark plug at the beginning of 
each mowing season or after every 100 
hours of operation, whichever occurs 
fi rst.  Spark plug type and gap setting 
are shown in the “PROD UCT SPEC I FI C-
A TIONS” section of this manual.

 WARNING:  To avoid serious injury, before per form ing any service or ad just ments:

1.   Release control bar and stop engine.
2.   Make sure the blade and all moving parts have completely stopped.
3.   Disconnect spark plug wire from spark plug and place wire where it cannot come in 

contact with plug.

5.   Remove belt from engine pulley on 

crankshaft.

TO REPLACE DRIVE BELT 
1.   Install new belt on engine pulley.
2.   Reinstall debris shield and blade.
3.   Return mower to upright po si tion.
4.   Install new belt on gearcase pulley.
5.   Reinstall drive cover.
NOTE: Always use factory approved belt 
to assure fi t and long life.

LAWN MOWER

TO ADJUST CUTTING HEIGHT
See “TO ADJUST CUTTING HEIGHT” in 
the Operation sec tion of this manual.

REAR DEFLECTOR
The rear defl ector, attached between the 
rear wheels of your mower, is provided to 
minimize the possibility that objects will 
be thrown out of the rear of the mower 
into the operator mowing position. If the 
defl ector becomes dam aged, it should be 
replaced.

TO REMOVE DRIVE BELT 
1.   Remove drive cover.
2.   Remove belt from gearcase pulley by 

push ing down on pulley and rolling belt 
off it.

3.   Turn lawn mower on its side with air 

fi lter and car bu re tor down.

4.   Remove blade and debris shield.

Belt

Drive 
cover

PUSH DOWN

ASSEMBLE ONE OF THESE LOW POINTS 
TOWARDS NARROW EDGE OF ELEMENT

Body

Screw

Cup

Element

ASSEMBLE SO LIP 
EXTENDS OVER 
EDGE OF
AIR CLEANER
BODY

LIP WILL FORM 
PROTECTIVE
SEAL WHEN
COVER IS ASSEMBLED

Lip

Содержание 944.366780

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды