background image

12

GRASS CATCHER
•   The grass catcher may be hosed with 

water, but must be dry when used.

•   Check your grass catcher often for dam-

age or de te ri o ra tion.  Through normal 
use it will wear.  If catcher needs replac-
ing, replace only with ap proved replace-
ment catcher shown in the Repair Parts 
section of this manual.  Give the lawn 
mower model number when ordering.

GEAR CASE 
•   To keep your drive system working 

properly, the gear case and area around 
the drive should be kept clean and free 
of trash build-up.  Clean under the drive 
cover twice a season.

•   The gear case is fi lled with lubricant to the 

proper level at the factory.  The only time 
the lubricant needs attention is if service 
has been performed on the gear case.

•   If lubricant is required, use only Elf Mul-

tis EP00.  Do not sub sti tute.

ENGINE

LUBRICATION
Use only high quality detergent oil rated with 
API service classifi cation SG–SL.  Select the 
oil's SAE viscosity grade according to your 
expected operating temperature.

TO CHANGE ENGINE OIL 
1.   Disconnect spark plug wire from spark 

plug and place wire where it cannot 
come in contact with plug.

2.   Be sure lawn mower is on level sur-

face.

NOTE:  Oil will drain more freely when 
warm.  Catch oil in a suitable container.
3.   Remove bottom oil drain plug.
4.   After oil has drained completely, 

replace oil drain plug and tighten se-
curely.

5.   Fill engine with oil.  (See “ADD OIL” in 

the Operation section of this manual).

6.   Reconnect spark plug wire to spark 

plug.

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

SAE VISCOSITY GRADES

-20 0 30 40 

80 

100 

-30 

-20 0  20 30 

40 

 

F

 

C

32 

-10 

10 

60 

5W-30

SAE 30

NOTE:  Although multi-viscosity oils 
(5W30, 10W30 etc.) improve starting in 
cold weather, these multi-viscosity oils will 
result in increased oil consumption when 
used above 32°F.  Check your engine oil 
level more frequently to avoid possible 
engine damage from running low on oil.
Change the oil after every 25 hours of op-
eration or at least once a year if the lawn 
mower is not used for 25 hours in one year.
Check the crankcase oil level before 
start ing the engine and after each fi ve (5) 
hours of continuous use. Tighten oil plug 
securely each time you check the oil level.

Drain plug

AIR FILTER
Your engine will not run properly and may 
be damaged by using a dirty air fi lter. 
Clean the element after every 25 hours 
of operation or every season.  Replace 
the air fi lter every 100 hours of operation 
or every season, whichever occurs fi rst.  
Service air cleaner more often under dusty 
conditions.

TO CLEAN AIR FILTER ELEMENT
1.   Remove screw.
2.   Re move air cleaner carefully to pre vent 

dirt from en ter ing carburetor.

3.   Take air cleaner apart and clean air 

fi lter element.

4.   Wash fi lter element in liquid de ter gent 

and water. 

5.   Wrap fi lter element in cloth and 

squeeze dry. 

6.   Lightly coat fi lter element with clean 

engine oil. Squeeze in towel to re move 
excess oil. Do not satu rate.

7.   Reassemble parts and put back on 

carburetor.

Содержание 944.366780

























Отзывы: