manualshive.com logo in svg

Craftsman 944.364230, Руководство пользователя, Страница: 6 / 12

Поделиться
Скачать
Craftsman 944.364230 Скачать руководство пользователя страница 6

6

TO CONVERT TO DIS CHARG ING 
MOWER

Your mower is shipped ready to be used 
as a mulcher. To convert to bagging or 
discharging:    
•   Lift discharge guard and remove 

mulcher plate.

•   Mower can now be used for side dis-

charge or optional grass catcher can be 
attached.

•   To return to mulching operation, sim ply 

reinstall mulcher plate as shown.

 

CAUTION

:  Do not run your lawn mower 

with out discharge guard, ap proved grass 
catcher or mulcher plate in place.

Hooks

Housing 
opening

Mulch plate

Hinge rod

Tab

Discharge 
guard

The operation of any lawn 
mower can result in foreign 
objects thrown into the 
eyes, which can result in 
severe eye damage. Always 

wear safety glasses or eye shields while 
operating your lawn mower or performing 
any ad just ments or repairs. We recom-
mend standard safety glasses or a wide 
vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory 
for optimum per for mance.  Speed is not 
adjustable.

ENGINE ZONE CONTROL

 

CAUTION: 

 Federal reg u la tions require 

an engine control to be installed on this 
lawn mower in order to minimize the 
risk of blade contact injury. Do not un der 
any cir cum stanc es attempt to de feat the 
function of the operator con trol. The blade 
turns when the engine is running.
•   Your lawn mower is equipped with an 

operator pres ence control bar which 
requires the operator to be positioned 
behind the lawn mower handle to start 
and operate the lawn mower.

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels 
for high cut, adjust cutting height to suit 
your requirements. Me di um position is 
best for most lawns.
•     To change cutting height, squeeze ad-

juster lever to ward wheel. Move wheel 
up or down to suit your re quire ments. 
Be sure all wheels are in the same set-
ting.

NOTE: 

Adjuster is properly positioned 

when plate tab inserts into hole in lever. 
Also, 9-position adjusters (if so equipped) 
allow lever to be positioned between the 
plate tabs.

LEVER BACKWARD 
TO LOWER MOWER

LEVER FORWARD TO RAISE MOWER

Plate 

tab

Lever

19

MODEL NUMBER 143.044500

CRAFTSMAN 4-CYCLE ENGINE

KEY    PART
NO.     NO.              DESCRIPTION

1         37791          Cylinder (Includes Key #2 and 20)
2         26727          Dowel Pin
6         33734          Breather Element
7         36557          Breather Assembly
                              (Includes Key Numbers 6 and 12A)
12       32447          Breather Tube
12A     36558          Breather Cover & Tube
12B     36694          Breather Tube Elbow
14       28277          Washer
15       30589          Governor Rod (Includes Key #14)
16       34839A       Governor Lever
17       31335          Governor Lever Clamp 
18       651018        Screw, T-15  #8-32 x 19/64"
19       33578          Extension Spring
20       32600          Oil Seal
30       37804          Crankshaft
40       40053          Piston, Pin & Ring Set (Standard)
41       40051          Piston & Pin Asssembly (Standard)
                              (Includes Key Number 43)
42       40022          Ring Set (Standard)
43       20381          Piston Pin Retaining Ring
45       30963B       Connecting Rod Assembly
                              (Includes Key Number 46)
46       32610A       Connecting Rod Bolt
48       27241          Valve Lifter
50       37575          Camshaft (NCR)
                              (Includes Key Number 104)
52       29914          Oil Pump Assembly
69       37609       *  Mounting Flange Gasket
70       37608          Mounting Flange (Includes Key
                              #72 thru 83, 306, 309A and 311A)
72       37614          Oil Drain Plug
72A     28534          Oil Drain Plug
75       27897          Oil Seal
80       30574A       Governor Shaft
81       30590A       Washer
82       30591          Governor Gear Assembly
                              (Includes Key Number 81)
83       30588A       Governor Spool
86       650488        Screw  1/4-20 x 1-1/4"
89       611298        Flywheel Key
90       611299        Flywheel
92       650815        Belleville Washer
93       650816        Flywheel Nut
100     34443C       Solid State Ignition 
101     610118        Spark Plug Cover
103     651007        Screw, T-15  #10-24 x 15/16"
104     37480          Cam Bushing
110     37047          Ground Wire
119     37755       *  Cylinder Head Gasket
120     37807          Cylinder Head
125     37806          Exhaust Valve (Standard Size)
                              (Includes Key Number 151)
126     37805          Intake Valve (Standard Size)
                              (Includes Key Number 151)
130     6021A         Screw  5/16-18 x 1-1/2" 
135     35395          Resistor Spark Plug (RJ19LM) 
150     31672          Valve Spring
151     31673          Valve Spring Cap
151A   40016A       Intake Valve Seal
169     36783       *  Valve Cover Gasket
172     36784          Valve Cover
174     30200          Screw  #10-24 x 9/16"
178     29752          Nut and Lock Washer  1/4-28
182     6201            Screw  1/4-28 x 7/8"
184     26756       *  Gasket, Carburetor to Intake Pipe

KEY    PART
NO.     NO.              DESCRIPTION

185     37794          Intake Pipe
186     32653          Governor Link
189     650839        Screw  1/4-20 x 3/8"
191     36559A       S.E. Brake Bracket
                              (Includes Key Number 195)
195     610973        Terminal
207     34336A       Throttle Link
216     33086          R.P.M. Adjusting Lever
223     650451        Screw  1/4-20 x 1" 
224     37793       *  Intake Pipe Gasket
238     650932        Screw  #10-32 x 49/64" 
239     34338       *  Air Cleaner Gasket
241     35797          Air Cleaner Collar 
245     35066          Air Cleaner Filter
250     35065          Air Cleaner Cover (Craftsman) 
260     36980B       Blower Housing
261     30200          Screw  #10-24 x 9/16"
262     650831        Screw  1/4-20 x 1/2"
275     37498          Muffl er
275A   36838A       Spark Arrestor Muffl er (Optional)
                              (Includes Key Numbers
                              284, 284A, 416 and 417)
277     650988        Screw  1/4-20 x 2-5/16"
279     28763          Screw  #10-32 x 39/64"
280     37717          Heat Shield
284     36663          Muffl er Defl ector (Optional)
                              (Includes Key Number 284A)
284A   650821        Screw  #10-32 x 1/2" (Optional)
285     35000A       Starter Cup
287     650926        Screw  #8-32 x 21/64"
290     29774          Fuel Line
292     26460          Fuel Line Clamp
298     28763          Screw  #10-32 x 39/64"
300     36916          Fuel Tank (Includes Key #292, 301)
301     37844          Fuel Cap
305     35647A       Oil Fill Tube (Includes Key #306)
306     37610          “O” Ring
307     35499          “O” Ring
309     650562        Screw  #10-32 x 1/2"
309A   650783        Screw  #10-24 x 3/4"
310     35648          Dipstick
311A   37611          Hold Down Bracket
313     34080          Spacer
370     37269          Name Decal
370C   37318          Primer Decal (3X)
370K   36695          Starter Decal
370R   37849          Warning Decal
380     640339        Carburetor (Includes Key #184)
390     590737        Rewind Starter
400     37809          Gasket Set
                              (Includes All Items Marked * )
416     37530          Spark Arrestor Kit (Optional)
                              (Includes Key Number 417)
417     650821        Screw  #10-32 x 1/2" (Optional)
900     750884        Replacement Engine
                              (order from 71-999)
900     750885        Replacement Short Block
                              (order from 71-999) 

           RPMs:         High 2900 to 3200 

NOTE:

This engine could have been built with

             Recoil Starter #590694.

NOTE:

  All component dimensions given in U.S. inches

            1 inch = 25.4 mm

Содержание 944.364230













Отзывы:

Нет отзывов