5
Assembly
1
3
2
4
A
AA
AA
AA
AA
D
C
B
E
Attaching the front and back legs
Attaching the drawer slide and top tray supportive
plates
Attaching the top tray
Attaching the pegboard
Attach the front legs (B, C) and back legs (D, E) onto the bottom
shelf (A) using 4 (AA) screws for each leg as shown.
Tip: Turn bottom shelf onto its side for easier assembly.
1. Use four (AA) screws to install one drawer slide (I) to each side of
bench in the position shown.
2. Position the two supportive plates (H) onto the top of the
assembly as shown.
3. Secure the two supportive plates (H) to the middle of the top
tray (F) as shown using six (DD) bolts, six (EE) nuts and two (AA)
screws.
Attach the top tray (F) to bench using 4 (AA) screws to secure
each corner as shown.
1. Attach the pegboard (J) to both sides of the assembly using
screws 3 (AA) screws in each location.
2. Insert one protective ring (O) into the pegboard and one into
the power cord hole on the back of bench as shown.
O
J
AA
AA
O
AA
AA
AA
AA
AA
H
H
I
AA
AA
DD
EE
