72 INCH WOOD TABLE WORKBENCH
Model
76633 - Butcher Block
WARNING
indicates a hazardous situation which,
if not
could
avoided, result in serious injury or death.
CAUTION
is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
WARNING
CAUTION:
Read and follow all Safety Rules and Operating
•
DO NOT
stand on this product. You may fall or cause product
to tip.
•
DO NOT
mount this product on a truck bed or any other moving
object. This may cause personal injury or product damage.
• Appropriately secure this product before moving with a forkl
ift.
•
DO NOT
tow with power equipment. The product may tip,
which may cause personal injury or product damage.
•
Periodically the surfaces should be cleaned with a mild
detergent and water.
•
Grease and oil can be removed with most standard cleaning
•
Auto wax will preserve the luster finish of the workbench metal
parts. Apply the wax as to a car. The wax will also help protect
the metal parts against scratches.
• Use appropriate safety equipment when using power
and hand tools. Failure to do so may cause personal
injury or product damage.
•
Obtain the aid of an assistant to assemble and move this unit.
Failure to do so may cause personal injury or product damage.
•
DO NOT
alter this product in any manner. This may cause per-
sonal injury or product damage.
• Unit must be located on a level surface. The product may be
-
come unstable and tip if stored or moved on an un-level surface,
which may cause personal injury or product damage.
SAFETY
MAINTENANCE
OPERATOR’S MANUAL
• Weight of bench: 104.7 lbs.
• The maximum combined weight of bench and loaded table must
not exceed 1500 lbs.
F1984
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the inner side of the leg panel.
CALL 1-888-331-4569 FOR SERVICE PARTS.
Refer to Parts
section of this manual for drawing and listing of Workbench parts.
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
Used under license
* Product you purchased may vary from picture shown
REPLACEMENT PARTS
WARRANTY
CAPACITIES
UNPACKING INSTRUCTIONS
1. After opening shipping box, remove protective cardboard from
top of wood table and place cardboard on floor.
2. With the aid of an assistant, remove wood table and lay topside
down on cardboard to protect wood from scratching.
NOTE: Before laying down, determine the front side of the table.
Front side has the Craftsman logo engraved into the right corner.
3. Remove the remainder of workbench parts from shipping box.
Check parts and hardware against the PARTS and HARDWARE
lists on the next page. If parts or hardware are missing return
workbench to place of purchase for exchange.
CRAFTSMAN LIMITED WARRANTY
FOR ONE YEAR from the date of sale this product is warranted
against defects in material or workmanship.
WITH PROOF OF SALE a defective product will be replaced free
of charge.
For warranty coverage details to obtain free replacement, visit the
web page: www.craftsman.com/warranty
This warranty is void if this product is ever used while providing
commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates,
IL 60179
