background image

4

 Serial Number:

 Date of Purchase:

 Gasoline Capacity / Type:        1,4 Liters (Unleaded Regular) 

 Oil Type (API SG–SL):             SAE 30 (above 32°F/0°C); SAE 5W-30 (below 32°F/0°C)

 Oil Capacity:                             0,57 Liters

 Spark Plug:                               Champion RJ19HX (Gap:  0,76 mm)

 Blade Bolt Torque:                    35-40 ft. lbs. / 47-54 N-m

 • The model and serial numbers will be found on a decal on the rear of the mower 

housing.  Record both serial number and date of purchase in space provided above.

PRODUCT SPECIFICATIONS

•   Never overfi ll fuel tank.  Replace gas 

cap and tighten securely.

V. GENERAL SERVICE

•   Never run machine inside a closed area.
•   Never make adjustments or repairs with 

the engine (motor) running. Dis con nect 
the spark plug wire, and keep the wire 
away from the plug to prevent ac ci den tal 
starting.

 • Keep nuts and bolts, especially blade 

attachment bolts, tight and keep equip-
ment in good condition.

•   Never tamper with safety devices. Check 

their proper operation reg u lar ly.

 • Keep machine free of grass, leaves, or 

other debris build-up. Clean oil or fuel 
spillage. Allow machine to cool before 
storing.

•   Stop and inspect the equipment if you 

strike an object. Repair, if nec es sary, 
before restarting.

•   Never attempt to make wheel height 

adjustments while the engine is running.

•   Grass catcher components are sub ject 

to wear, dam age, and de te ri o ra tion, 
which could expose moving parts or 
allow objects to be thrown. Frequently 
check com po nents and replace with 
man u fac tur er’s recommended parts, 
when necessary.

•   Mower blades are sharp and can cut. 

Wrap the blade(s) or wear gloves, and 
use extra caution when ser vic ing them.

•   Do not change the engine governor set-

ting or overspeed the engine.

•   Maintain or replace safety and instruc-

tion labels, as necessary.

 WARNING: This lawn mower is equipped with an internal com bus tion engine and 

should not be used on or near any un im proved forest-covered, brush-covered or 
grass-cov ered land unless the engine’s exhaust system is equipped with a spark 
arrester meeting applicable local or state laws (if any).  If a spark arrester is used, it 
should be maintained in effective working order by the operator.
A spark arrester for the muffl er is available through your nearest Sears Service Centre 
(See the REPAIR PARTS section of this manual).

Содержание 650 Series

































Отзывы: