manualshive.com logo in svg

Craftsman 650 Series, Руководство пользователя

Поделиться
Скачать
Craftsman 650 Series Скачать руководство пользователя страница 17

17

OTHER

•   Do not store gasoline from one season 

to another.

•   Replace your gasoline can if your can 

starts to rust.  Rust and/or dirt in your 
gasoline will cause problems.

•   If possible, store your unit indoors and 

cover it to protect it from dust and dirt.

•   Cover your unit with a suitable pro tec tive 

cover that does not retain moisture.  Do 
not use plastic.  Plastic cannot breathe, 
which allows con den sa tion to form and 
will cause your unit to rust.

IMPORTANT:  Never cover mower while 
en gine and exhaust areas are still warm.

 CAUTION:  Never store the lawn mower 

with gaso line in the tank inside a build ing 
where fumes may reach an open fl ame 
or spark.  Allow the engine to cool before 
storing in any en clo sure.

NOTE:  FRESH START

TM

 fuel cap and 

cartridge system automatically drips con-
centrated fuel preserver into your fuel tank 
and is an acceptable alternative to adding 
fuel stabilizer.

ENGINE OIL
Drain oil (with engine warm) and replace 
with clean engine oil.  (See “ENGINE” in 
the Maintenance section of this manual).

CYLINDER
1.   Remove spark plug.
2.   Pour 30 ml of oil through spark plug 

hole into cylinder.

3.   Pull starter handle slowly a few times 

to dis trib ute oil.

4.   Replace with new spark plug.

 Does not start       1.   Dirty air fi lter.                           1.   Clean/replace air fi lter.

                                2.   Out of fuel.                               2.   Fill fuel tank.
                                3.   Stale fuel.                                 3.   Empty fuel tank and refi ll tank
                                                                                            with fresh, clean gasoline.
                                4.   Water in fuel.                           4.   Empty fuel tank and refi ll tank
                                                                                            with fresh, clean gasoline.
                                5.   Spark plug wire is                    5.   Connect wire to plug.
                                      disconnected.                               
                                6.   Bad spark plug.                        6.   Replace spark plug.
                                7.   Loose blade or broken             7.   Tighten blade bolt or
                                      blade adapter.                                replace blade adapter.  
                                8.   Control bar in released            8.   Depress control bar to
                                      position.                                         handle.

PROBLEM                 CAUSE                                       CORRECTION 

TROUBLESHOOTING - See appropriate section in manual unless directed 
to a Sears Service Centre.

Содержание 650 Series

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды