Craftsman 536.886180, Руководство оператора

Страница: 11 / 128

SNOWTHROWER CONTROLS (Continued)
G. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
H. Skid Shoe — Used to adjust the ground clearance of the auger
housing.
I. Headlight — Used to operate the snowthrower in poor lighting
conditions.
ENGINE CONTROLS
A. Choke Control Knob — Used to start a cold engine (see
Figure 3).
B. Electric Start Button — Used to start the engine using the
electric starter.
C. Primer Button — Used to inject fuel directly into the carburetor
manifold to ensure fast starts in cool weather.
D. Safety Key — Must be inserted to start engine. Pull out to stop.
Do not turn safety key.
E. Starter Cord Handle — Used to start the engine manually.
F. ON/OFF Switch — Used to start and stop the engine.
G. Fuel Tank and Cap — Fill the fuel tank to approximately
1-1/2 in. (38 mm) below the top of the neck to allow for fuel
expansion.
H . Oil Fill Cap (Extended Dipstick)
Engine Controls Figure 3
C
H
A
F
E
B
G
STOP
D
11
en
Not
for
Reproduction