background image

2

TABLE OF CONTENTS

SAFETY RULES ..........................................................3
FULL SIZE HARDWARE CHART ................................4
CARTON CONTENTS .................................................5
ASSEMBLY ..................................................................5
OPERATION ..............................................................10
MAINTENANCE/STORAGE ......................................12

SERVICE AND ADJUSTMENTS ...............................13
TROUBLESHOOTING ...............................................13
REPAIR  PARTS ILLUSTRATION ..............................14
REPAIR PARTS LIST.................................................15
PARTS ORDERING/SERVICE .....................Back Page

  MODEL NUMBER: 

 

486.245951

  SERIAL NUMBER: 

 

__________________

  DATE OF PURCHASE: 

__________________

The model number and serial numbers will be found on 
a decal attached to the tubular frame.

You should record both the serial number and the date of 
purchase and keep in a safe place for future reference.

WARRANTY

ONE YEAR FULL WARRANTY

When operated and maintained according to the instructions supplied with it, if this Spreader fails due to a defect in material 
or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair (or replacement 
if repair proves impossible).

If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179

Содержание 486.245951

















Отзывы: