background image

6

• 

Check the area of operation thoroughly before using 
the tractor with the snow cab. The added height of the 
snow cab and a reduced field of vision require extra 
caution during operation.

• 

Enter the snow cab on the left side at the rear. 
Unfasten the elastic hook at the bottom and the velcro 
fastener in the top in the rear corner.

• 

Operate outside controls on a snowthrower or snow 
blade through the access flaps in the sides of the 
canopy.

• 

Up to three suitcase type weights can be added 
to the weight bracket on the snow cab to increase 
traction of the rear tires.

• 

Remove the upper snow cab frame and canopy 
before you transport the tractor in an open truck or 
open trailer.

CaUTION:  watch out for low tree limbs and 
other overhead objects which may interfere 
with the snow cab.

CaUTION:  Never transport the tractor in an 
open truck or open trailer while the snow cab 
is attached.

CaUTION:  This cab provides foul weather 
protection only. It does not provide protection 
against exhaust fumes, collision, rollover or 
other accidents.

STEP 6:  

(SEE FIGURE 6)

• 

Assemble two spiral hooks into holes on top of u-tube 
at front of tubing frame.

• 

Insert ends of rope down through spiral hooks 
attached to u-tube and then insert ends through two 
grommets in front of canopy.

FIGURE 6

STEP 7:  

(SEE FIGURE 7)

• 

Insert one end of rope through a third spiral hook and 
tie a knot in end of rope.

• 

Assemble spiral hook with rope attached through hole 
in footrest clamp.

• 

Insert other end of rope through remaining spiral 
hook. Tie a knot in end of rope so that when hooked 
to other footrest clamp the rope is tight and canopy 
frame is stable.

FIGURE 7

Read this owner's manual and safety rules before 
operating your tractor with the Snow Cab.

• 

Before each use make a thorough visual check of 
the snow cab for any bolts and nuts which may have 
loosened. Retighten any loose bolts and nuts.

• 

The vinyl portion of the canopy can be washed using 
water only, or a mild liquid soap and water.

• 

The plastic windows should only be washed using 
running water, or a mild liquid soap and water. Wash 
the windows with your bare hands only. A cloth, 
sponge or brush will scratch the clear plastic.

IMPORTaNT:  Never clean the windows when the plastic 
is dry. The clear plastic will scratch.

• 

Clean the vinyl canopy thoroughly and allow to dry 
before storing. Refer to the Cleaning section.

• 

Store the snow cab in a clean, dry area away from 
direct sun light.

ROPE

SPIRAL HOOKS

SPIRAL HOOKS

GROMMETS

GROMMETS

ROPE

FOOTREST CLAMP

SPIRAL HOOK

OPERaTION

MaINTENaNCE

Содержание 486.24278









Отзывы: