background image

10

DESCRIPTION 

KNOW YOUR ELECTRIC HEDGE TRIMMER 

This hedge trimmer has many built-in convenience features for fast, efficient and safe cutting. 

These features include the front full wrap assist handle, and lock-off button and trigger safety 

switch located under the rear handle to prevent accidental starts. Both button and trigger switch

must be pressed to turn the hedge trimmer on.
This hedge trimmer has a precision built electric motor and it should only be connected 

to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The trimmer 

should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.

DO NOT operate this trimmer on direct current (DC). The large voltage drop would 

cause a loss of power and the motor would overheat. If the trimmer does not operate 

when plugged into correct 120-volt, 60 Hz AC ONLY outlet, check the power supply. 

The trimmer comes with a 12-in. pigtail power cord and must be plugged into a proper 

extension cord. 

This Electric Hedge Trimmer Has the Following Features:
  1.  

4.2 Amp Motor provides the power to cut branches up to 5/8-inch in diameter. 

  2.  

1800 SPM-Strokes per minute (no-load speed) for fast cutting on a variety of hedge 

       trimming jobs around the yard.
  3.  

20-inch long Steel Cutting Blade provides durability and extended cutting reach.

  4.  

Dual Cutting Action helps minimize vibration to reduce operator fatigue and provides 

       a fast cutting action
  5.  

Hardened Steel Blades stay sharp longer.

  7.  

Front Full Wrap Assist Handle for maximum handling control

  8.  

Rear Handle for easy control in all angles of use

  9.  

Cord Retainer located on rear handle, keeps pigtail and extension cord connected

10.  

Lightweight Ergonomically Designed for easy use and handling comfort

      

DANGER: 

Laceration Hazard.  Keep hands away from blades. Handle

 blades with care.  Keep both hands on handles when power is on.

!

11

DESCRIPTION cont 

KNOW YOUR ELECTRIC HEDGE TRIMMER cont.

CALL-OUTS  (Fig. 1)

1. Lock-off button (on rear handle)

2. Front / Full wrap assist handle

3. Safety guard

4. Blade

5. Bubble level

6. Trigger safety switch

7. Extension Cord retainer

8. Pigtail Cord 

9. Plug 

10. Cutting Bar

 (Fig. 1)

 Blade Length

 Speed (Strokes per Minute)

 Cutting Capacity

 Cutting Action

 Power Requirement

 Weight

 Protection class

20-inches

1800

5/8-inch

Dual

120-volt, 60 Hertz AC

5.3 Lbs.

 SPECIFICATIONS

1.

2.

3.

4.

10.

5.

6.

7.

8.

9.

Содержание 172.797740











Отзывы: