11
DESCRIPTION cont.
This Pad Sander has the following features cont.:
PRODUCT SPECIFICATIONS
No-load Speed 12,000 OPM (Orbits Per Minute)
Rating 120 Volts, 60 Hz AC
Input 2.0 Amps
Orbit Diameter 1/16 in.
Paper Size 1/3 Sheet
Paper Type Non-Adhesive Sandpaper
Fig 2
Dust Bag
Assembly
Front
Assist
Handle
Rear Handle
On / Off Slide Switch
Paper Clamp
Paper
Clamp Lever
Platen
Slot
Platen
Cushion
Sandpaper
Live Tool
Indicator
green LED
light
12.
Vac adapter
allows hook-up to wet/dry vac (sold separately)
13.
High impact-resistant housing
helps protect tool from damage and reduces weight
14.
Permanently lubricated 100% ball bearings
for smooth operation and long life.
15.
Storage/Carrying Case
for easy carrying and storage of sander and accessories.
10
DESCRIPTION
Your 1/3-sheet pad sander has a precision-built electric motor and it should be connected
to a 120-volt, 60-Hz AC
ONLY
power supply (normal household current).
DO NOT
operate
on direct current (DC). The large voltage drop will cause a loss of power and the motor
will overheat. If the sander does not operate when plugged into correct 120-volt, 60-Hz
AC
ONLY
outlet, check the power supply. This sander has a 8-ft., 2-wire power cord
(no adapter needed).
KNOW YOUR PAD SANDER (Fig. 2)
NOTE: Before attempting to use your sander, familiarize yourself with all of the
operating features and safety requirements.
This Pad Sander has the following features:
1.
Powerful 2.0 amp motor
provides the torque, power and durability for a variety of
continuous sanding applications.
2.
12,000 orbits per minute with 1/16-in. orbit diameter
matched with the correct
sandpaper grit for the surface being sanded provides fast material removal and/or a
fine, smooth finish.
3.
Ergonomically designed rear handle and front assist handle with molded-in
comfort grip
for maximum balance, control and gripping comfort.
4.
Precision-tuned counterbalanced system
reduces vibration for smooth operation
and less operator fatigue.
5.
On/Off slide switch is conveniently located for easy control. Sealed to keep out
dust for long life. Lock-on for continuous sanding.
6.
Live Tool Indicator green LED light
comes on when sander is plugged into a power outlet.
7.
Die-cast aluminum sanding base
stands up to heavy-duty use.
8.
Two paper clamps,
one located at the front of the sander and the other at the back,
provide secure paper retention and simple, fast paper changes.
9.
The cushion located on the bottom of the sander
accepts standard non-adhesive
sandpaper.
10.
Uses 1/3-sheet sandpaper to provide a 25-sq. in. sanding surface
.
3 sandpaper sheets included (80, 100 and 120 grit).
11.
Built-in dust collection system
with removable dust bag assembly. This system collects
dust from work surface through the 10 holes located in the platen and cushion on the
bottom of the sander. A paper punch template is included for accurately punching holes
in the 1/3-sheet sandpaper.
