background image

10

• Lock the switch trigger by placing 

FORWARD/REVERSE SELECTOR 
in the center position.

• Depress latch located on front of 

battery pack (1) to release battery 
pack.

• Pull forward on battery pack (2) to 

remove from impact wrench.

WARNING:

 

If any parts are 

missing, do not operate your 
impact wrench until the missing 
parts are replaced. Failure to do so 
could result in possible serious 
personal injury.

WARNING: 

Always wear safety 

goggles or safety glasses with side 
shields when operating tools. 
Failure to do so could result in 
objects being thrown into your 
eyes, resulting in possible serious 
injury.

CHARGING BATTERY PACK

The battery pack for this tool has been 
shipped in a low charge condition to 
prevent possible problems. Therefore, 
you should charge it until light on front 
of charger changes from red to green.

NOTE:

Batteries will not reach full 

charge the first time they are charged. 
Allow several cycles (using impact 
wrench followed by recharging) for 
them to become fully charged.

TO CHARGE

• Charge battery pack only with the 

charger provided.

Make sure power supply is normal 
house voltage, 120 volts, 60 Hz, 
AC only.

• Connect charger to power supply.
• Attach battery pack to charger by 

aligning raised ribs on battery pack 
with grooves in charger, then slide 
battery pack onto charger.

• Red light should turn on. Steady

red light indicates normal fast
charging mode. If red light is flash-
ing, this indicates battery pack is 
deeply discharged or hot.
If battery pack is hot, red light should 
become steady after battery pack 
has cooled down.
If battery pack is deeply discharged, 
red light should become steady after 
voltage has increased, normally 
within 60 minutes.
If after one hour red light is still flash-
ing, this indicates a defective battery 
pack that should be replaced.
Green light ON indicates battery 
pack is fully charged and slow charg-
ing to maintain battery pack.
Yellow light ON and red light flashing 
indicates defective battery pack. 
Return battery pack to your nearest 
Sears Repair Center for checking or 
replacing.

Figure 6: Battery Charger

Содержание - 1/2" AIR IMPACT WRENCH 919983
















Отзывы: