Page: 1/4
Model : UC7224T4
INSTRUCTIONS FOR OPERATION
SETING THE OPERATING CONTROLS
1.
This unit operates on 23A
a 12 volts
battery (not included).
To prevent possible damage if the battery should leak , be sure to remove
the battery when the unit is not use .
2. This device whichone of black linesser ieswith AC 120V power supply.
the color of the ground wire is kelly.
3. Store the controller away from excess heat or humidity .
4. This remote control unit is required with 24bit code combinations. To prevent
possible interference from or to other remote units such as garage door
openers, car alarm or security system .
If you find that your fan and light
kit go on and off without using your control , simply change the combination
code in your transmitter and receiver .
5. Operation buttons on the panel of transmitter .
key– For fan HIGH speed control.
key– For fan MEDIUM speed control.
key– For fan LOW speedcontrol.
key– For fan OFF speedcontrol.
OR
OR
key– For light brightness and light ON/OFF control.
