page 8
If you wish to use the light kit
, remove 3 screws
from fitter plate and save them for later use.
Remove the Ground screw (labeled) from the
fitter plate and attach the
YELLOW/GREEN
wire from the LED light kit. Tighten ground
screw.
Connect
BLACK
wire from motor housing to
BLACK
wire from the LED light kit and
RED
wire
from motor housing to
RED
wire from LED light
kit. Make sure molex connections snap
together completely.
Carefully arrange wiring within the back of
LED light kit. Align holes in LED light kit with
holes in fitter plate. Re-insert screws that
were previously removed and securely
tighten all 3 screws with a Phillips
screwdriver.
Locate slots on glass shade and align with
nodules on inside of fitter plate.
Gently push up
on glass shade and turn
to the RIGHT
(clockwise)
until it slides completely into place.
If you do NOT wish to use the light kit
,
locate
slots on metal cover and align with nodules on
inside of fitter plate. Gently push up on metal
cover and turn to the
RIGHT (clockwise)
until it
slides completely into place.
CAUTION
: D
o
not
install the LED light kit if you
do NOT wish to use the light.
glass shade
nodules
slots
metal cover
LED light kit
nodules
slots
fitter plate
GROUND screw
molex connections
LED light kit
YELLOW/GREEN
wire
motor housing
motor housing
motor housing
9. Light Kit Assembly (Optional). (cont.)
