page 7
7. Canopy Assembly.
Locate 2 screws on underside of hanging
bracket and remove screw closest to the open
end of the hanging bracket. Partially loosen the
other screw. Lift canopy to hanging bracket.
Place rounded part of slotted hole in canopy
over loosened screw in hanging bracket and
push up. Twist canopy to lock. Re-insert screw
that was removed and then tighten both
screws securely.
hanging
bracket
8. Blade Assembly.
WARNING
: To reduce the risk of serious bodily
injury, DO NOT use power tools to assemble
the blades. If screws are overtightened, blades
may crack and break.
Tip:
Break apart fiber washers from set and then
place one washer on each blade screw orior to
installina blades
Locate 18 blade attachment screws in
hardware pack. Hold blade arm up to blade
and align holes. Insert 3 blade attachment
screws with fingers first and then tighten
screws securely with a Phillips screwdriver.
Repeat for the remaining blades.
Remove all blade arm screws/lock washers
from underside of motor. Align blade arm holes
with motor screw holes and attach blade arm
with blade arm screws/lock washers. Before
securing screws permanently, repeat with
remaining blade arms. Securely tighten all
screws.
NOTE
: Tighten blade arm screws twice a year.
blade arm
blade
blade arm screws/
lock washers
motor
housing
blade attachment
screws
canopy
