page 8
9. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Restore power from
circuit box and light switch (if applicable).
Test fan speeds with the pull chain. Start at
the OFF position (no blade movement).
First pull will set the fan to HI. Second pull
will set the fan to MEDIUM. Third pull will
set the fan to LOW. Fourth pull will again
set the fan to the OFF setting. (diagram 1)
If fan does not function, please refer to
"Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off before moving the
reverse switch. Set reverse switch to
recirculate air depending on the season:
- DOWN position in summer
(diagram 2)
- UP position in winter (diagram 3)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower
your thermostat setting in winter without
feeling a difference in your comfort.
Important: Reverse switch must be set
either completely UP or completely DOWN
for fan to function. If the reverse switch is
set in the middle position (diagram 4), fan
will not operate.
Attach pull chain extension supplied or
custom pull chain extension (sold
separately) to end of the pull chain.
motor housing
reverse
switch
pull chain
extension
diagram 2
diagram 3
diagram 4
diagram 1
