background image

Warranty.

Parts Replacement.

For parts and information, please refer to
"Parts Inventory" on page 2.
Craftmade/Ellington Customer Support:

1-800-486-4892

www.ellingtonfans.com

page 9

Troubleshooting.

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely in 
either direction.
3. Check to be sure fan is wired properly.

Problem: 

Light kit (optional) not lighting.

Solutions:

1. Check wall switch to fan.
2. Check that bulbs are installed correctly.
3. Check to be sure wires in canopy are wired 
properly.
4. Check to be sure that bulbs total no more than 
190W. 

[Note: Lamping light kit with bulbs that total more 

than 190W will cause the wattage limiting device to interrupt 
the flow of electricity to the light kit; using a light kit other 
than the one provided with the fan may have the same result.]

Problem: 

Fan operates but lights fail (if applicable).

Solutions: 

1. Check that bulbs are installed correctly.
2. Check to be sure wires in canopy are wired 
properly.
3. Verify that molex connections in switch housing 
are connected properly.
4. Replace defective bulbs with same type of bulb.
5. Check to be sure that bulbs total no more than 
190W. 

[Note: Lamping light kit with bulbs that total more 

than 190W will cause the wattage limiting device to interrupt 
the flow of electricity to the light kit; using a light kit other 
than the one provided with the fan may have the same result.]

Problem: 

Fan wobbles.

Solutions:

1. Use the balancing kit in one of the hardware 
packs. 

If no blade balancing kit is provided, please call 

Customer Support,1-800-486-4892, to request one.

2. Check to be sure set screw(s) on motor housing 
yoke is (are) tightened securely.
3. Check to be sure set screw on hanging ball is 
tightened securely

.

CRAFTMADE/ELLINGTON LIFETIME WARRANTY:
CRAFTMADE/ELLINGTON warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY: CRAFTMADE/ELLINGTON will replace 
or repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact 
Craftmade/Ellington Customer Service at 

1-800-486-4892

 

to arrange for return of fan. Return fan, shipping prepaid, to 
Craftmade/Ellington. We will repair or ship you a 
replacement fan, and we will pay the return shipping cost.
5-YEAR WARRANTY: CRAFTMADE/ELLINGTON will repair or 
replace at no charge to the original purchaser any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to 
Craftmade/Ellington. We will repair or ship purchaser a 
replacement motor and Craftmade/Ellington will pay the 
return shipping cost.
6-YEAR to LIFETIME LIMITED WARRANTY: 
CRAFTMADE/ELLINGTON will repair the fan, at no charge 
for labor only to the original purchaser, if the fan motor 
fails to operate satisfactorily when failure results from 
normal use. Parts used in the repair will be billed to the 
purchaser at prevailing prices at time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Craftmade/Ellington nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

Содержание E-Ellington GD52AN5C











Отзывы: