page 9
10. Light Kit Assembly (Optional).
Remove 3 screws from switch housing cap.
[Refer to diagram 1.]
If you wish to use fan WITHOUT the light
kit, align holes in switch housing cap with
holes in switch housing. [Note: The gap on
the top edge of the switch housing cap
must align with the reverse switch on the
switch housing for the proper fit.] Secure
switch housing cap with 3 screws that were
just removed. [Refer to diagram 1.] Please
proceed to Section 11 on the following page to
complete installation.
If you wish to use fan WITH the light kit,
remove hex nut and lock washer from
threaded rod at top of light kit fitter. Punch
center cap out of switch housing cap with a
screwdriver. Feed wires from light kit fitter
through center hole in switch housing cap.
Then, screw switch housing cap onto
threaded rod followed by lock washer and
hex nut. Tighten hex nut over lock washer
for a secure fit. [Refer to diagram 2.]
Locate BLACK (or BLUE) and WHITE wires
in switch housing labeled FOR LIGHT.
Connect WHITE wire from switch housing
to WHITE wire from light kit fitter. Connect
BLACK (or BLUE) wire from switch housing
to BLACK wire from light kit fitter. Be sure
molex connections snap together
completely. [Refer to diagram 3.]
Align holes in light kit fitter with holes in
switch housing. [Note: The gap on the top
edge of the switch housing cap must align
with the reverse switch on the switch
housing for the proper fit.] Attach light kit
fitter with screws that were previously
removed. Securely tighten all 3 screws with
a Phillips screwdriver. [Refer to diagram 3.]
Install 2 medium base 5.5 watt LED bulbs
(included). [Refer to diagram 3.]
IMPORTANT: When you need to replace
bulbs, please allow bulbs and shade to cool
down before handling.
["Light Kit Assembly" continued on next
page.]
switch
housing
switch housing
cap
motor housing
threaded
rod
diagram 1
diagram 2
center cap
switch housing
cap
hex nut
lock washer
light kit fitter
switch housing
cap
bulb
diagram 3
motor housing
switch
housing
black
wire
black
(or blue)
wire
white
wire
molex
connections
white
wire
light kit fitter
reverse
switch
