page 10
11. Automated Learning Process./Activating Code.
CAUTION
:
The wall and/or handheld remote control can be programmed to multiple receivers or fans. If this is
not desired, turn wall switch off to any other programmable receiver or fan.
Restore electrical power and then, if using wall control, set slider switch on wall control to the ON
position. Within 60 seconds of turning on the wall control, press and hold the
OFF
button on the wall
control for 5 seconds or until light blinks twice.
Turn power off again for at least 5 seconds
and then turn power back on. Within 60 seconds of restoring
the power, press and hold the
OFF
button on the front of the handheld remote control for 5 seconds or
until light blinks twice.
Test the fan functions to confirm learning process is complete --
See Section 13.
12. Remote Control Operation.
ON/OFF
-
turns wall control ON or OFF
slider switch
(switch not functional on handheld
remote)
HIGH
button -
turns
fan
to HIGH speed
MED
button -
turns
fan
to MEDIUM speed
LOW
button -
turns
fan
to LOW speed
OFF
button
-
turns
fan
OFF
L1
button
-
(not applicable for this fan)
L2
button
-
turns
light kit
ON/OFF when pressed once
REV
button
-
used to REVERSE blade direction (fan must
be set on
low
before
reversing blade
direction)
1
1
-
2
2
-
wall control
1
1
-
2
2
-
handheld
remote control
13. Testing Your Fan.
1
1
-
2
2
-
1
1
-
2
2
-
It is recommended that you test fan before finalizing
installation. Restore power from circuit box. Test wall
control (optional installation) by locating ON/OFF slider
switch on wall control, then set to the ON position. Test fan
speeds. Next, locate handheld remote control. Test fan
speeds with the different fan speed buttons. If the wall
and/or handheld remote control operates all of the
functions of the fan, battery has been installed correctly. If
the wall and/or handheld remote control do (does) not
operate all of the fan functions, refer to "Troubleshooting"
section to solve any issues before contacting Customer
Service.
Fan
must
be on LOW
before
setting the fan to reverse
direction. Use "reverse" (REV) button to recirculate air
depending on the season.
NOTE
: If the wall control/handheld remote control
interferes with other appliances, turn off power and go
back to the instructions in Section 11.
