Craftex CX507, Руководство пользователя

Страница: 8 / 23

8
ASSEMBLY
Position the two short and the two long top
braces upside down on the floor in the form
of a rectangle and attach the four legs to
the braces with bolts and lock nuts
provided. (hand tighten for now).
Now, attach the two short and two long
bottom braces to the legs and secure them
using bolts and lock nuts provided. (hand
tighten for now). See figure-2.
Figure-2 Assembling the stand
Thread the rubber foot into the bottom of
the legs, shown in figure-3.
Figure-3 Rubber foot
Turn the stand upright and fully tighten all
the bolts.
Get the help of a friend or use a fork truck
and lift the sander, align the mounting holes
and place the sander onto the stand.
Secure it using hex bolts, washers and nuts
provided.
Figure-4 Mounting the sander onto the
stand
Thread the handle into the hand wheel
shown in figure-5.
Figure-5 Threading the handle
Attach the dust collection elbow onto the
dust hood as shown in figure-6.
Figure-6 Attaching the elbow