11
Install the steel duct arm to the collector
body using screws and washers. Take the
canister filter and attach it to the elbow tube
using screws and washers. See figure-11.
Figure-11 Installing the steel duct arm
Attach the canister cleaning handle on to
the top part of the canister by tightening the
bolt against the flat side of the shaft.
Install the canister filter to the steel duct
arm with the help of screws and washers
provided. See figure-12.
Figure-12 Installing the canister filter
Attach the remaining smaller plastic bag to
the bottom of the canister filter using the
belt clamp provided. See figure-13.
Figure-13 Installing the plastic bag
Attach the long hose to one end to the main
housing and the other end to the collection
drum. Secure it with the help of hose
clamps provided. See figure-14.
Figure-14 Attaching the hose
This hose provides negative pressure
ensuring the drum and bag are secured
while the machine is on.
