10
Attach the cyclone funnel to the collector
assembly with the gasket in between using
screws provided. Secure it with the help of
the steel clamp provided. See figure-7
Figure-7 Attaching the cyclone funnel
Attach the castors to the bottom part of the
collection drum. Put the larger plastic bag
provided, inside the drum and put the lid on
the drum. Place the steel drum under the
cyclone funnel. See figure-8.
Figure-8 Putting the steel drum under the
cyclone funnel
Take the 7” hose and attach one end of it to
the bottom part of the cyclone funnel and
the other end to the drum lid. Secure both
ends with the help of two 7” hose clamps.
See figure-9.
Figure-9 Attaching the hose
Install the Y-inlet to the collector body with
the help of screws and washers provided.
See figure-10.
Figure-10 Installing the Y-inlet
