Craftex CT052 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 20

Craftex CT052 Скачать руководство пользователя страница 5

5

MODEL CT052-12” Dovetail Jig

As part of the growing line of Craftex woodworking equipment, we are proud to offer CT052-
12” Dovetail Jig. The Craftex name guarantees Craft Excellence. By following the instructions
and procedures laid out in this owner’s manual, you will receive years of excellent service and
satisfaction. The CT052 is a professional tool and like all power tools, proper care and safety
procedures should be adhered to.

Overall Dimensions:

Height ............................................................................................. 6”
Width .............................................................................................. 17”
Depth.............................................................................................. 12”
Shipping Weight ............................................................................. 22”
Net Weight ..................................................................................... 20 lbs.

Capacity:

Material Thickness, sides ............................................................... 5/16” to 1-1/4”
Material Thickness, front & back .................................................... 5/8” to 1-1/4”
Maximum Width ............................................................................. 12”
Joint......................................................................... 5/8” with 1/2" Template

Construction:

Jig ........................................................................... Pre-Formed Steel
Clamps ........................................................... Single Lever Adjustable Cam
Template ........................................................ CNC Machined Aluminum

Router Specifications:

Maximum Router Base Size ........................................................... 7”
Router Bit Required .............................. 14°, 1/2” Dovetail with 1/4” Shank
Guide Bushing Required ................................................................ 7/16” O.D.

Dovetail Jig

FEATURES

«
...
3
4
5
6
7
...
»

Содержание CT052





















Отзывы:

Нет отзывов