Craftex B318N, Руководство пользователя

Страница: 8 / 13

Operation Continued
Surface Sanding
1. Surface sanding is made easier
when the belt sander is in the
horizontal position.
2. Keep the work snug against the
table as you move it slowly against the
belt .
3. Keep your left hand lightly on the
surface and place the right hand
against the end of the stock to feed it
forward.
Cross-bevel Sanding
1. When ever possible tilt the work table to
form an open angle with the belt.( using a
closed angle might result in jamming the
work especially thin stock.
2. After tilting the work table be sure to re-
locate the table so its forward edge is close
to the abrasive surface.
3. Make sure to tighten the table in place.
8