Craftex B318N, Руководство пользователя

Страница: 6 / 13

Assembly Continued
Changing Belts
1. Remove the table from the machine.
2. Release the tension on the upper drum by turning
the handle.
3. Remove the old belt and place new belt over the
center of the roller assembly, then tighten the
tension assembly.
4. Make sure belt is tracking correctly before starting
work.
Fig. 1
Tracking Belt
Tracking the belt means to make sure the belt does not move to one side
and remains in the center of the drum.
1. Once the belt in mounted turn the sander on and off to check how the
belt is tracking.
2. To adjust the tracking turn the adjusting nut located on either side of
the machine until the belt tracks in the center of the roller. Fig (2)
3. When complete tighten the lock knob. Fig (3)
Fig. 3
Fig. 2
6