Craftex B2470, Руководство пользователя

Страница: 10 / 16

B2470 Tile Saw
Using the Angle Guide
Use the angle guide for cutting angled edges on your tiles
1. Attach the angle guide to the fence as you did that parallel guide using
the two locking knobs to hold the guide in place.
2. Use the cutting groove in the middle of the table to brace the edge of
your tile as you slide the tile and the table underneath the blade.
Maintenance
As with all tools, unplug the power cord before attempting and servicing
and before performing any maintenance.
General Maintenance
1. Regularly inspect the diamond saw blade. The use of a dull blade will
cause excessive wear on the motor and will not produce a good cut.
Replace as required.( Model # B2470B).
2. Inspect the mounting screw on all safety covers and the arbor nut on
the cutting wheel shaft. Tighten any that appear loose.
3. Protect the motor and electrical components from prolonged or
excessive exposure to water or wet conditions. Wipe dry as needed.
4. Periodically apply a light lubricant to the rail cover.
Note:
The pump is non-serviceable. If it should fail first try clearing the intake of
debris and be sure the hole is not plugged. If the pump still will not work
then it must be replaced.
10